Barwell re-builds and ex-demos for sale

Barwell re-builds and ex-demos for sale

We currently have the following Barwell re-build and ex-demo machines available for sale at a special price - please note that not all have been rebuilt yet. Ex-demo machines are indicated and are basically new machines used at exhibitions or in-house testing.

A rully-rebuilt Barwell second hand machine will have a full inspection and test on completion and will comply with all the latest safety standards including CE marking. It is also supplied with a... [more]

 
 
Ex-display Machines Available

Ex-display Machines Available

We have a number of ex-display machines available at reduced prices. These were used at the recent ACS rubber show. They are also available for demo at our Brunswick facility. Contact us at sales@barwellusa.com to discuss either a purchase or bringing your material for testing.

 
 
Visit Barwell at the ACS Exhibition, Cleveland USA: Oct 10-12

Visit Barwell at the ACS Exhibition, Cleveland USA: Oct 10-12

We are delighted to announce that we will be exhibiting at the Rubber Show in Cleveland next week. Please visit our booth #749.

You will be able to see the following machines at the exhibition:

 
 
Agents' Conference in Shanghai

Agents' Conference in Shanghai

We would like to extend a warm thank to all our agents who attended the conference in Shanghai last week and to our wonderful hosts from Barwell China.

 
 
Holiday closure and emergency support

Holiday closure and emergency support

We would like to wish all Barwell machine owners throughout the US, Canada and Mexico a very relaxing and enjoyable festive season.

Thank you for your support during 2016. We look forward to working closely with you in 2017.

MACHINE SALES: Our offices will be closed from December 23rd 2016 but will reopen for business on January 3rd 2017.

SPARES AND SERVICE: Our offices will be closed on December 23rd, December 30th,... [more]

 
 
The Barwell Gear Pump gets lots of interest in Pittsburgh

The Barwell Gear Pump gets lots of interest in Pittsburgh

We had a great show in Pittsburgh last week, meeting many friends and contacts, old and new. We exhibited our Gear Pump Preformer on the stand which gained lost of interest.

The Gear Pump is a fully automated method of preforming or extruding rubber compound, combining a highly advanced screw extruder with gear pump technology, allowing continuous long production runs.

If you would like to arrange a demo at our Brunswick facility to see if it... [more]

 
 
See the Gear Pump at the Rubber Show in Pittsburgh

See the Gear Pump at the Rubber Show in Pittsburgh

You can see the Barwell Gear Pump in action at the Internation Rubber Show in Pittsburgh between October 11-13th 2016.

Find out more about the Gear Pump here.  Visit us on booth 624.

Find out more about the exhibition >>

 
 
Upgrade your Barwell for FREE to include Product Set-up Database!

Upgrade your Barwell for FREE to include Product Set-up Database!

Improve your machine by adding a 500 item product set-up database system.

If you have one of the following BarwellPreformers - supplied before August 2016 – we can now update your machine so that you will be able to save product set-ups, all via your touch screen user-interface

  • Any upgraded ECO, C2, C3, MR400 or MIDI
  • Any C3 or MIDI rebuild with 5" touch screen user-interface
  • Any standard ECO machine with a 5” touch screen user-interface
This valuable enhancement can... [more]
 
 
Download our new brochure and guide on rubber deflashing machines

Download our new brochure and guide on rubber deflashing machines

Barwell’s solutions for removing ‘flash' from rubber products
Barwell has two versatile, automated, safe, and environmentally friendly methods of deflashing parts. These options have been specifically designed to produce a high quality finished product and to significantly increase processors’ operational productivity, and to reduce labor costs as well.

Click on the image below to download our new brochure.

 
 
Watch how the Barwell Spin Trim works...

Watch how the Barwell Spin Trim works...

The Barwell Spin Trim can provide a safe, quick and cost-effective method of deflashing small to medium size rubber parts, particularly molds with tear trim. 

Watch the machine in action below and learn how it works...

If you are interested, please email us for more information.

 
 
Twenty six reasons why the new Barwell Rebuild program provides you with confidence when buying a used preformer

Twenty six reasons why the new Barwell Rebuild program provides you with confidence when buying a used preformer

Barwell USA, worldwide specialist manufacturer of ram preformers for the rubber industry has launched an approved used machine program called ‘Barwell twentysix’. This program has been developed to provide rubber processors with reliable second-hand ram preformers, rebuilt by the original manufacturer with additional safety and operational features added to meet modern manufacturing requirements.

The program is the most rigorous and thorough ram preformer rebuild in the sector and removes the risk associated with buying a used machine.

Under... [more]

 
 
Holiday hours

Holiday hours

Barwell USA would like to take this opportunity to wish all our customers a very relaxing and enjoyable festive break. We would also like to thank you for your support in 2015, and hope you have a successful and healthy 2016.


Machine Sales

We will be closed from December 24th until January 4th 2016.

Spares and Service

We will be closed on December 24-25th and January 1st, otherwise we are open for business as normal... [more]

 
 
Download the NEW Barwell Rubber Processing Machinery brochure

Download the NEW Barwell Rubber Processing Machinery brochure

We are pleased to announce the launch of our new machine overview brochure, detailing our full range of market leading rubber processing machinery. 

Barwell is a renowned world leader in the manufacture, design and supply of high quality and multi-application processing machinery for the rubber industry. Our machinery is designed to improve processors’ production efficiency and accuracy, reduce material wastage and provide user-friendly operation and maintenance. We support multiple industries including: Footwear, Automotive, Sports and Leisure,... [more]

 
 
Barwell's new rubber processing machines are a hit at the rubber expo

Barwell's new rubber processing machines are a hit at the rubber expo

Barwell USA successfully exhibited its largest ever range of cost-cutting and quality enhancing rubber processing machinery at the recent ACS International Elastomer Rubber Expo in Cleveland, Ohio. 

The featured machines effectively demonstrated to visitors from all over the USA, how the enhanced processing capabilities and technical expertise of Barwell provides tangible benefits to those looking at production improvements, and reductions in operational costs.

Reliable, inexpensive and effective rubber deflashing

In... [more]

 
 
Gain FREE entry to the US Rubber Show as a guest of Barwell

Gain FREE entry to the US Rubber Show as a guest of Barwell

If you are planning on visiting the rubber show this October, we can provide you with free entry to the show and save you $50.

You can find us at stand #838 where you will be able to see a Barwell Gear Pump Preformer in action – ideal for processors who require continuous production, our Spin Trim Rubber Deflashing Machine operating with our newly launched separator and auto-feed units, and, finally, our new to the market ... [more]

 
 
The NEW Barwell Rubber Strip Cutter will be at the ACS Exhibition

The NEW Barwell Rubber Strip Cutter will be at the ACS Exhibition

The new Barwell Rubber Strip Cutter is designed as a lower investment automated option – compared to a preformer - for processors needing to produce small quantities of rubber strips.

It will cut strips up to a maximum width of 620mm and a maximum thickness of 20mm. It is much quicker than manual processes, operating at up to 84 cuts per minute.

 

The Barwell Strip Cutter is manufactured to meet the latest international... [more]

 
 
See a Gear Pump in action at the ACS show - ideal for long continuous production runs

See a Gear Pump in action at the ACS show - ideal for long continuous production runs

For the first time ever, we will be showing a Barwell Gear Pump preformer at an exhibition. Please take the opportunity to see one in action at this year’s ACS International Rubber Expo (October 13-15th, 2015, Cleveland Convention Center, Cleveland, Ohio) on stand # 838

Buy the display Gear Pump at a special show price

The Gear Pump on display (BPP70 model) will be available for sale at a special price after the... [more]

 
 
Test your own product on the Spin Trim at the ACS Show

Test your own product on the Spin Trim at the ACS Show

You can see our new and enhanced Spin Trim rubber deflashing processing system in action at this year’s ACS International Rubber Expo (October 13-15th, 2015, Cleveland Convention Center, Cleveland, Ohio) on stand # 838. 


There will be the opportunity for you to see your own products being tested on the machine. All machines will be available for sale at a special price after the show, on a first come, first served basis. If you... [more]

 
 
Special rubber show 'Barwell Spares' promotion

Special rubber show 'Barwell Spares' promotion

If you are an owner of a Barwell C3 Preformer - for a limited period only - we can offer you the opportunity to purchase at a specially discounted rate, a comprehensive spares pack for your machine.

All you have to do to be eligible is pre-order your pack and then collect from our stand (#838) during the ACS Rubber Show this October in Cleveland, Ohio (October 13-15th 2015). The pack is small in size and light in weight,... [more]

 
 
Barwell to display new rubber processing machines at the ACS rubber show

Barwell to display new rubber processing machines at the ACS rubber show

Barwell USA will be showcasing a number of its high quality rubber processing machines at this year’s International Rubber & Advanced Materials In Healthcare Expo (October 13-15th, 2015, Cleveland Convention Center, Cleveland, Ohio) on stand number 838.

One machine that visitors to the stand will be able to see is the recently launched Barwell Spin Trim Rubber Deflashing Machine, which provides a quick and cost-effective method of deflashing small to medium size rubber parts.  

The Spin Trim, as... [more]

 
 
Promotion: Barwell Machine Upgrades - Special offer for C3, MR400 and MIDI owners

Promotion: Barwell Machine Upgrades - Special offer for C3, MR400 and MIDI owners

Modernize your Barwell and improve production efficiency - If you are owner of a Barwell C3, MR400 or MIDI Preformer, you will know your machine was built to last. However, technology is changing and producers are telling us they want to get more from their existing machines.

In order to improve your production process, we have developed a machine upgrade package to incorporate the latest technology in your machine. This will... [more]

 
 
Barwell provide golf ball manufacturer with a fair way to drive forward!

Barwell provide golf ball manufacturer with a fair way to drive forward!

Barwell Global, the world leading manufacturer of preformers for the rubber processing industry has provided an internationally renowned manufacturer of golfing equipment with a cost-effective upgrade solution for their 20 year old Barwell preformer ensuring it is fit for another 20 years. 

Barwell machines are so reliable and efficient they eventually outlive most of the technology used in their control system when many lesser quality machines on the market would have long been replaced, but with a Barwell this... [more]

 
 
Barwell offer machine upgrades to improve production and reduce cost

Barwell offer machine upgrades to improve production and reduce cost

Barwell Global, leading manufacturer of rubber processing machinery, is offering low investment machine upgrade packages to Barwell owners to improve manufactured product quality, ease operator control and reduce running and maintenance costs due to less wastage, cheaper replacement parts and enhanced usability.

When customers purchase a Barwell they benefit from a lifetime of reliability and support, part of this commitment is to ensure that older machines are continually improved enabling processors to produce high quality moulds... [more]

 
 
New Barwell service and spares division for USA

New Barwell service and spares division for USA

Barwell Global Ltd, worldwide specialist manufacturers of processing machinery for the rubber industry, is pleased to announce changes that will give Barwell users throughout the USA an improved service for spares and service as well as machine sales and technical support.

As part of a long-term plan for sustained growth and continuous development to meet the changing requirements of the rubber processing industry, Barwell has set up a new dedicated spares and service facility. The new division,... [more]

 
 
ACS Rubber Expo 2012, Cincinnati, Ohio

ACS Rubber Expo 2012, Cincinnati, Ohio

We will be exhibiting at the ACS Rubber Expo in Cinicinnati, Ohio at the Duke Energy Center between 9th-11th October 2012.

Our stand number is 348. We look forward to welcoming you to our stand.